Migrate from 16F628 to 16F628A


Closed Thread
Results 1 to 11 of 11

Hybrid View

  1. #1
    Join Date
    Jul 2003
    Location
    Sweden
    Posts
    237


    Did you find this post helpful? Yes | No

    Default

    Make sure brownout reset in not enabled.

  2. #2
    Join Date
    May 2005
    Location
    Minnesota
    Posts
    31


    Did you find this post helpful? Yes | No

    Default Low voltage LF628

    Thanks, disabling Brown-out Reset did the trick. I thought I had tried every combination to get the darn thing to run. Thanks.

    Is it possible to use the 3v regulator when using the ICP? Presently I have to disconnect the 3v to the uC, connect 5v and burn the chip.

    Otherwise, other than the mess I have soldering a resonator onto the SSOP, I'm in much better shape than I was 4 hours ago.

    Brad

Similar Threads

  1. 16f628 / 16f628a
    By azmax100 in forum General
    Replies: 5
    Last Post: - 27th January 2009, 03:37
  2. Are 16f628 and 16f628A difference each other?
    By elektrodam in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 15th July 2006, 06:20
  3. SERIN2 not working with 16F628
    By d1camero in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 6th May 2004, 20:37
  4. HSEROUT and 16F628A
    By fredblah in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 6th May 2004, 00:07
  5. 16F628 on-chip eeprom problem
    By atomski in forum mel PIC BASIC Pro
    Replies: 16
    Last Post: - 4th March 2004, 07:43

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts