Any ideas on how to accomplish this?

[Archilochus]

Don't know if this is what Melanie was referring to with the pressure sensitive cable... but I just remembered something from back when I used to live in an area with 'full-service' gas stations... They had a hose run across the pump area, and when a car ran over the hose the change in air pressure [I think] in the hose triggered a sensor with a bell in the service bay.

Seems like even if a deer did step on the hose, it might not displace enough air to cause a trigger.

Of course it would only work on a hard, fairly smooth surface.
Also would be hard to hide from the trespassers, who will be likely to destroy any sensors they find.

Arch

[Acetronics2]

Seems our friend Sayzer has re-invented the wheel ....

http://www3.telus.net/chemelec/Proje...aser-Alarm.htm

.... no comment, I bought some 2N5777 about 35 Years ago... and they are always here !!!

Alain

[sayzer]

Any progress out there?

[ronsimpson]

You want to cense cars and not animals.
1.)Place a rubber hose across the road. Plug the far end. Close end has a pressure censor. The hose should not be airtight, it needs a small hole [leak]. When a car drives over the hose, the air pressure changes.
2.) I have a commercial device. There is a “coil” in a PVC tube buried under the road. The coil oscillates. The frequency is not stable, it slowly drifts over time. When a car passes over the coil the frequency changes fast. It is built on a ‘metal detector’ idea.
3.) I now am playing with flux-gates for another projects. It appears I can detect large metal objects 20 feet away. Too complex but fun.

I can supply details if you need it.

[Archangel]

Love those bureaucratic words, Traffis lights around town use a large coil of wire under the street to sense the metal vehicles presence. I believe a smaller coil is there too as the tank coil of an oscillator. I remember seeing metal detector circuits over the years that used 2 coils, and you would null out the circuit, when metal appeared it would throw the circuit out of Null and it would oscillate. I believe the coils were supposed to be at right angles to each other.

Another suggestion: Radio Shack sells a cheap / toy metal detector, it might be the basis of what you need.

Last Idea, bury a sheet metal plate,or install overhead or on side, and hook to a darlington transistor switch circuit. the vehicle might induce enough stray capacitance to trigger switch.
Cheap enough to experiment, anyway.

edit : Doe! sorry Ron, I didn't see your mention of metal detector.

Melanie: I like it!
JS
http://www.ssec.honeywell.com/magnet...eets/an218.pdf
http://home.clara.net/saxons/bfo.htm
http://www3.telus.net/chemelec/Projects/Metal/Metal.htm
http://home.skif.net/~yukol/MetalE.htm
http://electronics.howstuffworks.com...-detector3.htm
http://www.absoluteautomation.com/dr...rms/index.html