sound command & music

[trying]

way back when I found a web site that had a lot of music code for using PBP and sound command . but I can no longer find it. Anybody know of a good site. trying to have fun with the grandkids.
thanks

[Melanie]

Here's a sound demo (yankeedoodle) for 12F675...

http://www.picbasic.co.uk/forum/showthread.php?t=64

[trying]

Thanks Melanie the kids loveed it just wondering it a LCDOUT command "yankie doodle xxxxxxxx"could be put at the beginning and another one after Data $01,$52,$4E,$20"stuck a feather in his capxxxxxx"
to show the words

[Acetronics2]

May be here also ...

http://www.rc-float-flying.rchomepag.../PIC/Sound.htm

héhé,

Alain

[Melanie]

It's a tiny little music routrine that reads four Bytes from EEPROM and acts on it. If you changed it say to FIVE bytes, then use Byte5 (if say non-zero) to indicate what you want to display. Kinda tough on a 12F chip, because lack of pins means you're having to drive a Serial LCD to send your message, and the Serial LCD will take time (even at 9600 baud), so it will impact on the music giving you an abnormal pause between notes. Better if you choose a PIC with more pins.

[trying]

Sorry Melanie
I was going to use a 16f630. and not use the words in real time
lcdout $FE,1 "yankiexxxxxxxx"
lcdout $FE, $C0 "xxxxxxpony"
displayed then start the music
but I not sure how to insert the second
lcdout $FE,1 "stuckxxxxxxxx"
lcdout $FE, $C0 "xxxxxxmacorone?"
after the $20 Gf7
this is for 5 years olds it can miss a beat or two. LAL
thanks for anyhelp