Newbie - 16F628A and switch latching

[Acetronics2]

Hi, Malc

try this:

CMCON=7
TRISB=%00000011 'set RB0 & 1 as input and the rest output

SW1 var PORTB.0 'switch input pin 6 (RB0)
SW2 var PORTB.1 'switch input pin 7 (RB1)


LED1 var PORTB.4 'LED1 on pin 10 (RB4)
LED2 var PORTB.5 'LED1 on pin 11 (RB5)

Swset1 var bit
Swset2 var bit

Swset5 var bit


low led1
low led2

Swset1=0
Swset2=0

swset5=0 'Var swset is set low

Main:

if SW1=0 then
'If switch is LOW (Grounded) then

IF swset5 =1 THEN

swset1 = 0
swset2 = 0
swset5 = 0

loop: IF sw1=0 then loop 'wait for button release ... Yessss !!!

GOTO jump

ENDIF

Toggle Swset1 'change swset1 from 0 to 1
pause 500 'debounce delay
endif


if SW2=0 then 'If switch is LOW (Grounded) then
Toggle Swset2 'change swset2 from 0 to 1
pause 500 'debounce delay
endif

Jump:

If Swset1=1 then 'if swset1 is 1
high led1 'then turn on RB4 (and hence the LED)
else
low led1 'else, LED is off
endif

If Swset2=1 then 'if swset2 is 1
high led2 'then turn on RB5 (and hence the LED)
else
low led2 'else, LED is off
endif

If swset1=1 and swset2=1 then
toggle swset5
endif

Goto Main
End

And now try to understand WHY !!!

Alain