help!!!!

[lokanand]

hi,
i am a newcomer to PIC basic pro.i would like to know what scale values {while using pot command } are appropriate for a 200k pot, and 0.1microF.
bye

[Archilochus]

Hi lokanand,
I don't think there are any specific values for SCALE - it's sort of a try it and see kind of thing. There is a bit of code in the PBP manual for calibrating the SCALE value - give it a try.

Arch

[sayzer]

Also, 200k pot with 100n is not a good combination.

As Archilochus said, check the manual.

Play with 50k, 5k and 10n, 100n.


-----------------------------------

[Melanie]

I favour 100n for the POT Capacitor (same one's I use for decoupling sprinkled around the PCB - saves loading another component reel onto the board stuffing machine). With a 10K variable, the scale value is about 95.

[champion]

does this mean a 100nanoFarad???

[paul borgmeier]

yes
100 nF = 0.1 uF