HPWM and A to D interaction question 18F252

Results 1 to 8 of 8

Threaded View

  1. - 1st May 2006, 18:58 #5
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    ARRRRRRRRRRGHHH invaders from the other camp. Hi Fanie, welcome here!

    HPWM or PWM module can't interfer with a/d. BUT it could have something to do with the CCP2 trigger if there's something bad in the CCP2CON<3:0> register setting. Refer to section 17.5 of datasheet. But if it was the problem... i doubt the PWM will work anyways.

    BUT as we didn't see any code line and schematic, it sounds more like a hardware problem... maybe a overloaded Psu too!
    Last edited by mister_e; - 1st May 2006 at 19:17.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules