7 segments clock

[mister_e]

if it's only a simple clock, i don't know why you should need anything else than One pic and few transistor to do a multiplexed display.

something to play around of => http://www.picbasic.co.uk/forum/show...quency+counter

[charudatt]

Would there be a RTC in it ?.

I had made something using a RTC.

regards
Charudatt

[4Lewis]

Trying to make a clock that outputs to LEDs, (NOT TO A DISPLAY!) Are their any suggestions to how to start this type of project? Do I need a clock or timer circuit to hook up to my PIC to figure out proper timing. Please help/suggest. All the best. - Lewis

[the_apprentice]

Thank's to all for the answers.

I made a 4 digits display using 7 segmentes C.C., I'm trying to use a rtc, ds1302. In the future I will add a temperature sensor. I'm trying to learn how to write in pbasic, but it takes long time, is a long process. I'm playing with with differents components like 7 Seg, led's, sensors (light, distance, etc), i have also a lot of 5x7 and 8x8 dot matrix led that i would like to drive them.

thanks.