PBP Book


Closed Thread
Results 1 to 40 of 84

Thread: PBP Book

Hybrid View

  1. #1
    malc-c's Avatar
    malc-c Guest


    Did you find this post helpful? Yes | No

    Default

    Well Bruce started this thread in April 2006, so if Bruce is about half way through by mid February '07..... It should be in the shops in time for this coming Christmas

  2. #2
    Join Date
    Oct 2004
    Posts
    440


    Did you find this post helpful? Yes | No

    Default

    A new 3rd edition of "The Art of Electronics" by Horowitz and Hill was close to being published like a year or two ago. There were preorders taken. An electronics Bible. I know one problem is what to include as electronics keeps changing.

    Anyone know the current status?

    Norm

  3. #3
    Join Date
    Mar 2006
    Location
    INDIA
    Posts
    89


    Did you find this post helpful? Yes | No

    Talking Great.....

    Don't forget to explain tons of config FUSES of 18F series in detail.

  4. #4
    Join Date
    Jun 2004
    Location
    Michigan
    Posts
    8


    Did you find this post helpful? Yes | No

    Smile Writing a book

    I was just cruising the forum after being gone for quite a while and saw this string of posts on Bruce's book. I wish him luck. When I wrote "Programming PIC Microcontrollers with PicBasic" I had no idea how much work would be involved. For every single page printed there were 15 in the trash. It took me 2 1/2 years from start to publisher release and by then half the book was a bit dated. In the end though it's worth it if you help just one person get started. The email feedback you get is mostly positive and that is one of the rewards.
    As Melanie stated it doesn't pay well for the hours put in. You do it because you want to pass on your knowledge and help future generations of programmers get started with the art of programming. At least that's why I still do it.

    Keep plugging away Bruce. I'm sure it will be a great book.
    Chuck Hellebuyck
    Electronic Products
    http://www.elproducts.com
    [email protected]

  5. #5


    Did you find this post helpful? Yes | No

    Default

    As Melanie said, a pdf or html version will quickly end up as a free download link on pirate boards. looking forward to it. (erm, the book, not stealing it.) so how does pulsin work again?

  6. #6
    Join Date
    Feb 2006
    Location
    Brussels, Belgium
    Posts
    104


    Did you find this post helpful? Yes | No

    Default

    Any progress on the book ? As others have said (and without putting anyone else's down) Bruce's code snips and suggestions are always valued.

  7. #7
    Join Date
    Jul 2003
    Posts
    2,405


    Did you find this post helpful? Yes | No

    Default

    Hi Andrew,

    Thanks for the kudos. It's a lot slower process than I had first thought, but it's around 3/4
    done now. I'm not big on books with bugs in code or schematics, so I'm taking my time to
    build & test every single thing that goes into it. That and breaking down all the technical
    mumbo-jumbo from PIC datasheets into laymans' terms is the real time hog.

    Also - changes to the compiler and a ton of new PICs' set it back a long way.

    Gotta pay the rent 1st, and work on the book in whatever spare time I can find, but I'll try
    to have it done before I croak - or everything changes again...;o}
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com

Similar Threads

  1. PBP, ASM and LST files
    By HenrikOlsson in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 12th January 2010, 13:43
  2. Loop with two motor and 2 sensors
    By MrRoboto in forum mel PIC BASIC
    Replies: 4
    Last Post: - 8th December 2008, 23:40
  3. Compiler differences between PBP 2.33 & 2.46
    By nikopolis in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 2nd May 2006, 19:01
  4. how to get the PBP book in malaysia?
    By PoTeToJB in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 2nd March 2006, 09:27
  5. Newby- PBP wont compile for 18F (MPLAB)
    By jd76duke in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 17th December 2005, 23:30

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts