Weak Pull-up on 12F683

[paul borgmeier]

It does not appear you have set GP5 as an input.

Try:

TRISIO=%101011

Good Luck,

Paul Borgmeier
Salt Lake City, Utah
USA

edit - looks like I hit return 3 minutes after Bruce did (at least we match) pb

[BobP]

Many thanks everyone. It was the TRISIO data. As you identified I didn't enable GPIO.5 as an input!
It was late and too much coffee. It didn't help the software acting as if the port was an input...

Now working as expected.

Thanks,
BobP