|
Servo command common values
Hi, Win
Servos pulses HAVE to respect those values ...
700 to 2300 µS high level @ 20 to 60 Hz
Not to create mechanical or electrical damage.
Sometimes it's possible to try a wider range, but it doesn't fit all brands ...
Your 50 value is out of range !!!
Just try a value in the 70 - 230 range ...
Note also the " @ 20 to 60 Hz " ... the pulse has to be sent every 50 to 15 ms ...
Alain
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
oooo...really..TQ for the reply..i'll try the value for the servo..
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks