Sorry Luciano
Same result ...
Alain
|
Sorry Luciano
Same result ...
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
Finally got it ... but not good job !!!
Hi all,
I finally got it ...
But I had to memorize 2 times the values ... and read the second writings.
So, I think ...
one lonely WRITE command writes the value FF instead of what you want !!!
I stop here ...
Working program attached ...
Alain
PS:
for curious guys ... that is just a simple R/C gadget to use two servos in parallell ... Neutral, 2 1/2 travels, finely adjustable, plus invertible rotation for servo n°2 ...
There's also a fail-safe ... servos are driven to their neutral ( recorded ...) position, if signal lost.
Plus visual programming help w/ three LEDS ...
Yessss ....
Last edited by Acetronics2; - 6th April 2006 at 15:04.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
No, you have a problem... WRITING the value TWICE is not correct.
You DO need up-to-date PBP and MPLAB (MPASM) as there was an EEPROM issue going back to v2.45 I think. Half the problem was Microchips Assembler too. Latest versions of everything work as expected in this department. Unfortunately I don't have that particular PIC to confirm your results.
http://www.picbasic.co.uk/forum/showthread.php?t=547
|
Thanks , Mel, but ...
My PbP and MPASM are the last versions : I verified it this morning ... and re-loaded PbP and its patch
PbP 2.46 Patched and MPASM 5.02 ...
Sorry, Mel ...
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
You have CONFIRMED you are invoking the latest PBP and MPASM and not an old installed version by mistake or error in path statements?
|
Sorry ...
YES, I do confirm ... old versions are always thrown to the trash box ...
PbP used version seen in the MPLAB / Output/ Build window too ...
Alain
Last edited by Acetronics2; - 6th April 2006 at 15:18.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
Just because I'm a nice girl, I've ordered one... hopefully, I'll have a 18F1320-I/P tomorrow...
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks