Waterloo , sad country ...
Last news :
I added a value at position 9 (0 ) and copied the "writes" from location 1 to 9 to 21 to 29 ...
result : all values Written ... except value at loc.2 that has been overwritten by "FF" .... my three lonesome further values always aren't written.
may be there are overwritten too ... i'll never know.
one sure thing ... there's a writing problem !!!
Alain
Hi, SOUGATA
All writing protections have been removed ... I have to program in two times : at first config , and then program. default configs locks the programming !!!
Last edited by Acetronics2; - 5th April 2006 at 18:10.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Bookmarks