Automatic control and display of Room temperature

[sougata]

Hi there,

Are you new to programming or just trying to use a micro for the first time ? Let me know the compiler version you are using and I shall try to explain.However it is important if the code at all worked for you. That is if you at all got any display.

[afterdate]

hello Dear Sir;
sougata

yes this time first time to use PIC program. and i have project call Automatic control and display of Room temperature. and i thing to use PIC and i have my friend tell me use PIC Basic language it's easy. and he give me the code same i put in the first topic.and u give me a code similler my code. and what do u mean which compiler version u mean the program. i have PROTON IDE Lite.
if also in the university MPLAB program.

Excuse me Sir could i speck to u by Email. and my Email ; [email protected]

thank you very much
all the best

[sougata]

Hi,

This forum is for PIC Basic Pro. This forum is located at www.picbasic.org/forum/ .Since I am not a Proton user it is not possible (practical) to comment on code examples. Regarding email, it is not necessary because this forum is full of pros. This forum has helped me a lot to understand the complexities of programming. I hope you would find somebody on the Proton forum to help you out.


Best of Luck

[afterdate]

hello
sougata

which program this one , and do u know how i do my project by your code.

DEFINE OSC 4

DEFINE ADC_BITS 8 'Number of bits in ADCIN result
DEFINE ADC_CLOCK 3 'ADC clock source (rc = 3)
DEFINE ADC_SAMPLEUS 50 'ADC sampling time in microseconds

DEFINE LCD_DREG PORTB ' Set LCD Data port
DEFINE LCD_DBIT 4 ' Set starting Data bit (0 or 4) if 4-bit bus i.e, Portb.4-PORTb.7
DEFINE LCD_RSREG PORTB ' Set LCD Register Select port
DEFINE LCD_RSBIT 2 ' Set LCD Register Select bit i.e, PORTC.5
DEFINE LCD_EREG PORTB ' Set LCD Enable port
DEFINE LCD_EBIT 3 ' Set LCD Enable bit i.e, PORTB.3
DEFINE LCD_BITS 4 ' Set LCD bus size ot 4 bit Upper Nibble (4 or 8 bits)
DEFINE LCD_LINES 2 ' Set number of lines on LCD to 4 Lines
DEFINE LCD_COMMANDUS 2000 ' Set command delay time in us
DEFINE LCD_DATAUS 50 ' Set data delay time in us

VOLT VAR BYTE ' VOLT AS A VARIABLE

TRISA.0 = 1 ' SETUP PORTA.1 AS AN INPUT
TRISB = 0 '


Input PORTA.0
ADCON1 = %10000000

LCDOUT $FE,1 : PAUSE 100
main:
ADCIN 0, VOLT
LCDOUT $FE,$80, DEC VOLT , " "
goto main


thank you very much

all the best

[sougata]

Hi,

The code example that you posted was in Proton PIC Basic and I converted it into PBP ( PicBasicPro).

In this forum we share codes and problems but you have to walk your own way. You may find somebody to give you code examples to sort out problems but you should have the understanding of what you are doing. Otherwise it would be impossible for you to upgrade/maintain/troubleshoot your program. As I have been a hobbyyist I always have the intention to help hobbyist but with a micro you cannot simply expect to do a copy/paste sort of experiment.
Send me what you want to do exactly, what features you want and what PIC you want to use. I will try to post some examples if possible.

[afterdate]

hello Dear SIR ;

thank you very much Sougata

all the best