Reset problem

Results 1 to 23 of 23

Thread: Reset problem

Threaded View

  1. - 21st March 2006, 19:29 #2
    DynamoBen's Avatar
    DynamoBen
    DynamoBen is offline Member
    Join Date
    Jun 2005
    Location
    Wisconsin
    Posts
    382

    Did you find this post helpful? Yes | No

    Default

    Try putting a .01uF cap near the PIC between Vdd and Vss. You also may want to try a 10uF cap at the output of your voltage regulator.

    Do you have a diode between the relay coil contacts?

    If none of these suggestions work a schematic is going to be nesscary.
    Last edited by DynamoBen; - 21st March 2006 at 19:39.
« Previous Thread | Next Thread »

Similar Threads

  1. Pic reset and following lock up problem
    By zerosvarka in forum General
    Replies: 19
    Last Post: - 17th June 2009, 20:03
  2. LCD Reset Problem
    By Bill Legge in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 24th February 2009, 08:55
  3. process hung problem + self reset
    By eng.alamin in forum mel PIC BASIC Pro
    Replies: 26
    Last Post: - 31st October 2008, 16:22
  4. USART Problem , but don't know where, in pc? or in PIC?
    By precision in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 15th July 2007, 08:12
  5. PIC problem, ways to do reset
    By lab310 in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 26th May 2005, 14:31

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules