Sampling rate - PIC16F877

Closed Thread
Results 1 to 27 of 27

Hybrid View

  1. - 26th April 2004, 09:55 #1
    Melanie's Avatar
    Melanie
    Melanie is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,358

    Did you find this post helpful? Yes | No

    Default

    Yes, you can switch to whatever Port or pins you wish.

    If you are not using weak pull-up's on PortB, delete the appropriate line in my code as it's not required.

    You will then need an external pull-up Resistor, say 10K, connect it between the PIC pin that you are using and Vdd (+5v). The Push-Button is as usual connected between the PIC pin and Vss (0v).

    Melanie
  2. - 29th January 2011, 05:09 #2
    meetpeter's Avatar
    meetpeter Guest

    Did you find this post helpful? Yes | No

    Default Sampling rate - PIC16F877

    hey guys,
    i am new here and i am in search of actual rates bcoz i could not find it any where.
    can any one help?????
    thanks in advance!!!!
  3. - 29th January 2011, 10:00 #3
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default

    Hi, Meetpeter

    Did you just read previous posts ???

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Similar Threads

  1. PIC16f877 code crosses boundary @800h
    By inventosrl in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 6th April 2009, 22:03
  2. Auto Baud Rate Detection
    By mytekcontrols in forum Serial
    Replies: 10
    Last Post: - 31st October 2005, 02:17
  3. PIC12F675, accuracy of baud rate with Internal Oscillator
    By Chris Mayhew in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 31st August 2005, 22:41
  4. A/D sampling time and ...
    By yasser hassani in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 30th April 2004, 08:16
  5. Baud Rate and Timing Calculator
    By picnaut in forum General
    Replies: 3
    Last Post: - 23rd January 2004, 16:48

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules