LCD with T6963C controller

[mister_e]

have a look there
http://www.geocities.com/researchtri...glcd_page.html

be sure your supply is clean and un-noisy. Some GLCDs seems to be noise sensitive. Worst if the cable length between your Board and your LCD is a little bit long. Pace some 10uF tantalum+0.1 uF as close as you can of your GLCD supply lines.

Should work... or you're another eBay victim LMAO!!!


Oh here's a great source for about everything... www.epanorama.net

[Demon]

The LCD still had the original protective film over the display, the contacts are unused and it is dust free. I'm pretty sure the claim of it being 'new' is true, I must be screwing up something.

Thanks for the links, gonna check them out.

Robert

[Demon]

Well, I got it working thanks to the folks who posted code over at CompSys.

I was able to print, now if I can just figure out how to get a SED1335 gLCD going.

Robert

[jcleaver]

thinking about buying one of these any updates on this thread?

[CuriousOne]

15 years passed since last post
I ordered ST7920, but seller sent these instead by mistake. 240x64 resolution. They're on the way, and I'll give them a try once they arrive.
But what I've curious about, documentation mentions built-in fonts, but sample code posted above seems to load own characters, why?

[mark_s]

The built in fonts are 6x8 or 8x8 pixels. So they are very small. Most users want different size fonts. The compsys1 pbp code works

http://www.compsys1.com/workbench/On...3C/t6963c.html

http://www.compsys1.com/support/gli2/

http://www.compsys1.com/support/PBP_Files/t6963c/

[CuriousOne]

Well, common HD44780 based displays have 5x7 font, but no one complains...
Anyways, let them arrive and let me see, what they can do