LCD with T6963C controller

Results 1 to 10 of 10

Threaded View

  1. - 11th March 2006, 22:08 #2
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    have a look there
    http://www.geocities.com/researchtri...glcd_page.html

    be sure your supply is clean and un-noisy. Some GLCDs seems to be noise sensitive. Worst if the cable length between your Board and your LCD is a little bit long. Pace some 10uF tantalum+0.1 uF as close as you can of your GLCD supply lines.

    Should work... or you're another eBay victim LMAO!!!


    Oh here's a great source for about everything... www.epanorama.net
    Last edited by mister_e; - 11th March 2006 at 22:13.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
« Previous Thread | Next Thread »

Similar Threads

  1. Is this code not initialising the LCD properly?
    By Platypus in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 30th January 2010, 19:14
  2. 16f688 LCD what have I done wrong
    By spitfiredriver in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 8th August 2009, 19:54
  3. LCD Problem
    By karenhornby in forum General
    Replies: 3
    Last Post: - 19th June 2008, 11:43
  4. LCD will not start
    By btaylor in forum mel PIC BASIC Pro
    Replies: 49
    Last Post: - 24th May 2007, 02:30
  5. Dedicated LCD Controller question
    By chuckles in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 27th February 2006, 14:44

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules