X-10

Results 1 to 7 of 7

Thread: X-10

Threaded View

  1. - 11th March 2006, 11:13 #2
    muddy0409's Avatar
    muddy0409
    muddy0409 is offline Member
    Join Date
    Jun 2005
    Location
    Up the bush, Western Plains, NSW Au
    Posts
    216

    Did you find this post helpful? Yes | No

    Default

    You only really need 3 wires. 0v, ZeroCrossing & Data.
    The diagram in the manual is correct. Just make sure if you are using a ready made 4 core phone lead that has 2 RJ12 plugs, that the wiring is " Straight Thru'". You can confirm this by holding both flugs side by side, both the same way up and look at the colour of the wires from left to right. They should be in the same order.
    Oh yeah, you should also have a 4k7 or 10k pull-up on the zero crossing pin on the PIC.
    Last edited by muddy0409; - 11th March 2006 at 11:18.
« Previous Thread | Next Thread »

Similar Threads

  1. How to drive the Vinculum VDIP1 in UART mode
    By BrianT in forum Code Examples
    Replies: 41
    Last Post: - 23rd May 2013, 12:34
  2. Data EEPROM gets clobbered during programming
    By BrianT in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 18th July 2008, 02:46
  3. USB-FTDI[UM232R] with PIC16f877a
    By bjox in forum USB
    Replies: 1
    Last Post: - 23rd February 2008, 22:40
  4. Serin serout problem
    By lerameur in forum mel PIC BASIC Pro
    Replies: 336
    Last Post: - 6th February 2007, 04:25
  5. Need help with 16f819 10 bit ADC
    By bannrikae in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 26th September 2005, 15:20

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules