Bits to Word?

[Ruben Pena]

Hi:
You can create aliases for each configuration bit. Ex:
name1 var byte1.0
name2 var byte1.2 etc.
then, you can clear or set each one by

name1 = 0, or name1 = 1

Or you can test them:
if name1 = 1 then do_something
I hope this helps.
Greetings...
Ruben de la Pena

[picster]

To set bit 4 on and leave the rest unchanged:

mybyte=mybyte | %00010000 'OR function with selected bit masked ON

To turn bit 4 off and leave the rest unchanged:

mybyte=mybyte & %11101111 'AND function with selected bit masked OFF

OR you can set multiple bits on or off by either ADDING or SUBTRACTING the bit weight to/from either 0 or 255 respectively.

------------------Picster-----------------