Hi,
Make sure the PIC and the 4026B use the same +5V and same GND.
See page 20 and 21 of this PDF.
http://www.rev-ed.co.uk/docs/PIC_electronics.pdf
Best regards,
Luciano
Hi,
Make sure the PIC and the 4026B use the same +5V and same GND.
See page 20 and 21 of this PDF.
http://www.rev-ed.co.uk/docs/PIC_electronics.pdf
Best regards,
Luciano
Luciano, thats a great document. Any others that might be usefull?
The PIC worked on the breadboard today and when linked to the standard PCB it worked. However, when I placed the PIC in the same PCB and power supply the circuit stopped working. I have attached a PCB copy of the circuit
Any schematic?
Any Filtering problem?
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Try sticking a large Cap across the power supply. To insure good filterization. Another thing... the MCLR pin...is it held high at one place and not the other? Or is it floating? If so, program it in the Define to stay high.
Dwayne
Ability to Fly:
Hurling yourself towards the ground, and missing.
Engineers that Contribute to flying:
Both optimists and pessimists contribute to the society. The optimist invents the aeroplane, the pessimist the parachute
Pilots that are Flying:
Those who know their limitations, and respect the green side of the grass...
Bookmarks