need help to set up a serial link

[Sphere]

Try this.
--------------------------------------------------------------------------
Include "modedefs.bas" 'to enable the mode option for n9600

trisa = %00010
TRISB = %00000000

symbol sec = 1000

d0 var byte
s_out var porta.0 'set pin no as output pin
s_in var porta.1 'set pin no as input pin
led var portb.4

loop:
Serin s_in, T9600, 1000, no_data, ("x"), [d0]
serout s_out, T9600, [d0]

goto loop

no_data:
high led
pause sec
goto loop

end
--------------------------------------------------------------------------
Sphere

[kinsiro]

cannot oh.. the compile process is fail.. it stated error line-bad expression.. error line-expected '('
why will it like this?

[Sphere]

Tried compiling the program and got the same errors. What do you want the program to do and what commands are you sending to the pic.

Sphere.

[Melanie]

Ahem... people!!!!

The compiler is telling you what the problem is... let's all go back and read the MANUAL as to the correct SYNTAX for SERIN...

Not this...

Serin s_in, T9600, 1000, no_data, ("x"), [d0]

...but this...

Serin s_in, T9600, 1000, no_data, ["x"], d0

There's even an example in the book - read it!

[Sphere]

Hi Melanie still new to all this serial stuff myself, I just thought I would try to help some with the limited knowledge I have gained. By the way what part of the world are you from.

Sphere.

[Melanie]

I'm pretty cosmopolitan actually, but for the last few years London England (hub of the Universe) is my home.

[Sphere]

Thanks for the reply Melanie.From the UK myself. Maybe we meet accross a keyboard again.

Sphere.

[kinsiro]

Ahem... people!!!!

The compiler is telling you what the problem is... let's all go back and read the MANUAL as to the correct SYNTAX for SERIN...

Not this...

Serin s_in, T9600, 1000, no_data, ("x"), [d0]

...but this...

Serin s_in, T9600, 1000, no_data, ["x"], d0

There's even an example in the book - read it!

thx malenie.. and every1 i had done the rs232 part.. n comm is perfect