Voltage Drop!

Closed Thread
Results 1 to 2 of 2

Thread: Voltage Drop!

  1. - 2nd March 2006, 09:31 #1
    kblim's Avatar
    kblim
    kblim is offline Junior Member
    Join Date
    Jul 2005
    Location
    Selangor, Malaysia
    Posts
    31

    Default Voltage Drop!

    Hi all,

    Please help me. I am developing a board for the filling machine. Facing problem when I HIGH the PortA.1 in 16F88, the normal 5Vcc will drop to 4.8XX volt.

    This make my circuit not stable because it was reading the analog signal from the load cell at the same time.

    Please help me on this issue. Thanks!


    kblim
  2. - 2nd March 2006, 11:15 #2
    Bill H's Avatar
    Bill H Guest

    Did you find this post helpful? Yes | No

    Default Schematic diagram

    The only way you'll get much response to your question is to provide some detail. The diagram of your circiut would be a good start.

    Bill H
« Previous Thread | Next Thread »

Similar Threads

  1. high voltage high frequency H-Bridge
    By George in forum Off Topic
    Replies: 6
    Last Post: - 27th April 2009, 11:50
  2. Expanded Scale Voltmeter
    By Pic_User in forum Schematics
    Replies: 6
    Last Post: - 8th February 2008, 20:32
  3. Help with final project
    By OvERKiLL in forum General
    Replies: 4
    Last Post: - 15th December 2006, 20:35
  4. Project-Read voltage in / different voltage out
    By andydoc in forum mel PIC BASIC
    Replies: 6
    Last Post: - 8th August 2005, 15:20
  5. Low Voltage Detection
    By Srigopal007 in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 5th January 2005, 18:29

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules