Erratic PIC12F675 behavior

Results 1 to 10 of 10

Threaded View

  1. - 25th February 2006, 01:22 #3
    russman613's Avatar
    russman613 Guest

    Did you find this post helpful? Yes | No

    Default

    It turns out that if i let the whole test circuit sit with the power off for about 10 minutes or so, it works fine. then, if i power it off right away, it does not blink but after about two minutes the LED comes on and stays on. then, if i power it off and let it sit for 10 min or so, it seems to blink per normal (for one power cycle).

    interesting test to suggest. what are you thinking may be my problem?

    russ
    Last edited by russman613; - 25th February 2006 at 02:19.
« Previous Thread | Next Thread »

Similar Threads

  1. PIC12F675 problem with port 5
    By NL2TTL in forum mel PIC BASIC
    Replies: 2
    Last Post: - 5th June 2009, 01:23
  2. Erratic behavior with a PIC16F88 and an custom LCD Board
    By russman613 in forum Schematics
    Replies: 8
    Last Post: - 7th December 2006, 15:42
  3. erratic behavior when using MPASM vs. PM
    By cool_justin in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 8th June 2006, 01:08
  4. Erratic LCD behavior
    By Travin77 in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 1st April 2006, 19:48
  5. PIC12F675 trouble
    By russman613 in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 27th February 2006, 18:40

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules