yes switch is a variable (switch contacts on xmtr)
like I say, the software as I have shown....
SHOULD WORK
why it doesn't has me perplexed.
switch or switch.0 same thing....may be redundant but that's not what I need to know.
|
yes switch is a variable (switch contacts on xmtr)
like I say, the software as I have shown....
SHOULD WORK
why it doesn't has me perplexed.
switch or switch.0 same thing....may be redundant but that's not what I need to know.
|
Hi Michael,
I thought I had an idea but I didn't read enough of the datasheet.
BobK
Last edited by BobK; - 22nd February 2006 at 04:34.
|
Well, as it turns out, the code on this post was fine and it works with no problem. I don't want to seem like a bozo so I had to post the facts. As it turns out, it was the problems I was having with my new EPIC programmer and trying to install meprog.
I discussed it with Jeff at Melabs and he confirmed there has been "some" compatibility problems.
I spent 2 days trying to get meprog to work right and it's what I was using when I tried to program the code in this post.
EPICwin on the other hand is flawless and I can look forward to learning from all of you and enjoying these 16F628 chips that were recommended.
Sure beats the OTP parts.
FYI.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks