Help with STR ArrayVar\n\c with SerIn2

[Almightyrastus]

'**********
'Define variables
'**********

MENU var BYTE 'Menu variable
TIME var BYTE(11) 'Time variable
WARN var BYTE 'Warning variable
LAT var BYTE(10) 'Latitude variable
LONG var BYTE(11) 'Longitude variable
NS var BYTE 'North/South variable
EW var BYTE 'East/West variable
SPD var BYTE(6) 'Speed variable
DIR var BYTE(6) 'Direction variable
DATE var BYTE(6) 'Date variable
ALT var BYTE(5) 'Altitude in m variable
ALTU var BYTE 'Altitude units
HDOP var BYTE(5) 'Horizontal dilution of precision
SAT var BYTE(2) 'Satellites used
METRE var WORD 'Height in meters variable
AFEET var WORD 'Height in feet variable
TEMP var BYTE 'Temp. for altitude conversion
MULT var WORD 'Multiplier for altitude conversion
ALTVAR var BYTE 'Set number for times round loop
ALTF var BYTE(5) 'Altitude in feet storage

'**********
'setup interrupts
'**********

OPTION_REG = $7f 'Enable PORTB pull-ups and rising edge trigger
INTCON = $90 'Enable INTE (port b, pin 0) interrupt
MENU = "0" 'Clear the menu variable
ON INTERRUPT GOTO INT 'Define interrupt handler

'***********
'Startup Screen
'***********

PAUSE 100 'Allow LCD to power up for 750ms

LCDOUT $FE, 1 'Clear screen and display information
LCDOUT "GPS Display"

PAUSE 500 'Startup screen pause time


'**********
'Main program
'**********

'First collect data from GPRMC and GPGGA strings

RXLOOP:

SERIN2 PORTB.1, 188, 3000, RXERROR, [WAIT ("GPRMC"), skip 1, STR TIME\11\",", STR WARN\1, skip 1, STR LAT\10\",", STR NS\1, skip 1, STR LONG\11\",", STR EW\1, skip 1, STR SPD\6\",", STR DIR\6\",", STR DATE\6]

SERIN2 PORTB.1, 188, 3000, RXERROR, [WAIT ("GPGGA"), skip 39, STR SAT\2, skip 1, STR HDOP\5\",", STR ALT\6\",", STR ALTU\1]



There you go, there is plenty more after that but that is the bits that are giving me the first set of troubles.

/*edit*/ it is laid out better than that, much the same as the example you gave

[Darrel Taylor]

Hmmm, very odd. That also compiles without error here.

Just added these labels.

RXERROR:
INT:

Do you have any more SERIN2's in the program?

Are you trying to create a Variable, Constant or Label named STR anywhere in the program?

Added: What version of PBP do you have?

DT

[Almightyrastus]

I have just tried compiling only that code from above with adding in the 2 extra labels and I get the same errors as before. I am using proton compiler 2.1.3 to do this.

I have to admit I am more than a bit new at doing all this so would there be any settings I have may have overlooked when starting out?

I know the code I have is meant to work on a 16F628 as I have seen the end result from a previous application

[Darrel Taylor]

Ah, there we go. Wrong language.

The program you have is written for PicBasic Pro from meLabs

The compiler you have is Proton+ from Crownhill Associates.
<br>

[Almightyrastus]

Ahh right that would explain a lot then, like I said I am kinda new to this hehe.

I just hope I can get access to the compiler through uni and fast or I am stuffed to put it politely

Thanks for your help

[Darrel Taylor]

If it's an emergency or something, you might try
http://www.compilespot.com/

Pay by the month kind of deal. But might get you going while waiting for the compiler to be shipped.
<br>
DT

[Almightyrastus]

Thankyou so much, this may just save my skin (not to mention degree)