MELABS USB Programmer not seen in Microcode Studio

[JoeK]

Andrew,

I had the same problem with Microccode Studio Plus. I emailed MElabs and their response was..."Simply select the melabs Serial Programmer in MCS. The software is the same as the melabs USB Programmer."

It seems to work OK.

[AndrewC]

Andrew,

I had the same problem with Microccode Studio Plus. I emailed MElabs and their response was..."Simply select the melabs Serial Programmer in MCS. The software is the same as the melabs USB Programmer."

It seems to work OK.

Thanks for answering Joe. I got the same answer from MeLabs but I've been travelling so haven't had a chance to test it.

Andrew