@beto
tanks for quick response.
i've alredy tryed what you said.but the responce is
êú
1=B
2=C
3=D
4=E
5=F
6=G
7=H
8=I
9=J
10=K
11=L
12=M
13=N
14=P
15=R
16=S
17=T
18=U
19=V
20=
there is no change
|
@beto
tanks for quick response.
i've alredy tryed what you said.but the responce is
êú
1=B
2=C
3=D
4=E
5=F
6=G
7=H
8=I
9=J
10=K
11=L
12=M
13=N
14=P
15=R
16=S
17=T
18=U
19=V
20=
there is no change
Last edited by cesurcelik; - 17th February 2006 at 18:14.
|
You are using level shifters?, the problem then looks as voltage chirp, if you is using only resistors then try to set High the TX pin BEFORE Data transmition!
|
@beto
thanks again
i did it as you said
now the response is:
0=ÿ
1=B
2=C
3=D
4=E
5=F
6=G
7=H
8=I
9=J
10=K
11=L
12=M
13=N
14=P
15=R
16=S
17=T
18=U
19=V
20=
i can see first address but not correct value
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks