Thanks Bruce, I saw that after my post about the maximimum freq.

I wonder why that is with 4 mhz to work with? Especially if it can be set up otherwise?

I was wondering, has there ever been any discussion about PBP being enhanced so it could do all (or some anyway) of all this module and register manipulation at the higher level language of PBP?

My problem is, I don't really use PBP on a frequent basis....but when I do, it all comes back to me pretty quickly because the statements are so user friendly and of course, about as close to "English" as you can get.

I don't know why they couldn't make the modules and registers more in this mode as well. ?

TIMER1 could be a statement with associated (and many, no doubt) options.

etc.

When you need to do something as an occasional user, it's an absolute hell because there really isn't any decent path that is shown in the databook.

You have to go from one page to another just to see what R/W bytes are in play and what bits do what.....it's very scattered and not organized well.

Anyway....just a thought and something for the suggestion box.