Hi GeoJoe,
GoTo http://www.microchip.com/ and type "BLDC MOTOR" into search box.
You will have plenty of codes, schematics etc.
Sayzer
Hi GeoJoe,
GoTo http://www.microchip.com/ and type "BLDC MOTOR" into search box.
You will have plenty of codes, schematics etc.
Sayzer
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
Hi Joe,
Here's a URL; not sensorless, but does use a PIC, and seems very informative.
http://frederic.brame.free.fr/variat...0brushless.htm
I am also very interested in being able to drive a BLDC (perhaps a CDROM motor?) with a PIC, although I have not made much headway yet. Would love to hear your experience(s).
Regards,
Anand
AN857 is sensored/sensorless complete BLDC Motor controller example.
Because the pdf file is approx. 550Kb. I could not upload it here but it can be downloaded at MicroChip's WEB site.
The file has everything explicitly described inside ; including ASM codes for sensored and sensorless versions, schematics, mosfet drivers etc.
I can send the file to anyone who has difficulty in finding it; just drop me an e-mail.
Also, pls post the progress here if you use PBP code so that we will not have to get through the same experiences.
Sayzer
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
I have to design a BLDC-Controller.
I will use a 18Fxx31. I have the microchip-board "PICDEM ... DC LV"
So I have to translate the ANs to PBP.
Has anyone done this before ?
The PICDEM-board also runs with an dsPIC, but PBP doesn't ;-)
PBP 2.50C, MCS+ 3.0.0.5, MPLAB 8, MPASM 5.14, ASIX Presto, PoScope, mE mikroBasic V7.2, PICKIT2
Bookmarks