Instant Interrupts Questions

Results 1 to 24 of 24

Threaded View

  1. - 24th February 2006, 07:37 #9
    jheissjr's Avatar
    jheissjr Guest

    Did you find this post helpful? Yes | No

    Default

    An exert from an 18F datasheet:

    When the IPEN bit is cleared (default state), the interrupt priority feature is disabled and interrupts are compatible with PICmicro mid-range devices. In
    Compatibility mode, the interrupt priority bits for each source have no effect. INTCON<6> is the PEIE bit, which enables/disables all peripheral interrupt sources. INTCON<7> is the GIE bit, which enables/disables all interrupt sources. All interrupts branch to address 000008h in Compatibility mode.
    Last edited by jheissjr; - 24th February 2006 at 07:49.
« Previous Thread | Next Thread »

Similar Threads

  1. Instant Interrupts - Revisited
    By Darrel Taylor in forum Code Examples
    Replies: 772
    Last Post: - 17th February 2016, 22:14
  2. Clock using Instant Interrupts
    By PICpocket in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 16th February 2009, 21:43
  3. DT instant interrupts with mister_e keypad
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 26th November 2008, 20:02
  4. DT's Instant Interrupts trouble
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 24th November 2008, 20:48
  5. Problems with instant interrupts from DT for pic18
    By dip1 in forum General
    Replies: 1
    Last Post: - 1st November 2006, 03:11

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules