Using Nokia LCD

[Gusse]

Even with "pause 100" don't work ; still "fleas". And yes, the display with part info printed work good. The last line it's with problem !!!! She don't want to be erased !! I try another program and look at differences. First two foto are with good display; "main" program - and, after LCD_clear , "set" display. The last two are with "fake" display. The last line remain from "main" program display !!!

LCD seems to work OK if you can write text to it, to all 6 rows. Try some PAUSE after Lcd_Clear -command if that will make any difference. Could it be so that LCD controller is quite slow and next command will override Lcd_Clear. Just speculations ...

BR,
-Gusse-