Using Nokia LCD

[HJota]

I hall

I know it's not very new, but I think is interesting.
This program receive text information true rs232, display in a Nokia 3310 LCD capital and small letters, display 3 sizes off characters, variable and fixes size of characters, normal and inverted screen and character.

I've test the program connecting the Tx of my Pc tru a 74ls04 and it works greatly with 3.3 v

Have a nice time!

[shahidali55]

Hi HJota,
Can you provide me the schematic you are using ?

[HJota]

Shahidali55

You can trie my (not finish) web page, were I have all he information about this project.
If you have any douts please tell me.

Hope it helps you a little.


http://pwp.netcabo.pt/hjota/

(Soon I will publisgh the PCB picture)

[theguru56]

Hi,

can someone pls post simple 3310 lcd example, where i can only put a pixel on my screen. i dont need code where i can display characters, pictures etc. Just as simple and compact as possible.

Thank you...

[skimask]

can someone pls post simple 3310 lcd example

http://www.picbasic.co.uk/forum/showthread.php?t=327
Simple examples all over...

[theguru56]

But i'm newby to ccs c and i am not able to translate given code into basic.,...,

[skimask]

But i'm newby to ccs c and i am not able to translate given code into basic.,...,

If you'd apply yourself, do a little bit of reading/looking/etc, you might (or might not) notice that not ALL of the code in the 80-odd posts is written in C.