The first one is about your config fuse. intrc_osc should be replaced by
Code:
INTRC_OSC_NOCLKOUT
This one use the same config fuses as 16F628A & 16F627A. The complete list is in M16F62XA.inc file in pbp\inc folder.

The second one is just a warning,
http://picbasic.co.uk/forum/showthread.php?t=555&

Can be bypass within MicroCode Studio.
http://www.picbasic.co.uk/forum/show...66&postcount=2

EDIT: Gusse, that's what happen when few people think the same thing at the same time