PIC10F200 Automated IR Light Switch

[Bruce]

Yeah i used the TSOP1140, but any el-cheapo IR module should work pretty much the same for this low-budget gadget.

I used it because there was room on the back to attach my tiny little PCB with the rest of my parts. The surface mount version 10F200 parts are like a grain of salt.

Just don't sneeze when you have em in front of you. Lost 4 of my samples.

P.S. Thanks! (interrupts)
Wait till I get through the 18F version. That one's even better

You're welcome. I figured you were already working on the 18F version once you posted the 18F USART_Init macro, then modified it with CHK?RP for the 14-bit core...;o}

Keep em comin.


.

[Darrel Taylor]

I figured you were already working on the 18F version once you posted the 18F USART_Init macro, then modified it with CHK?RP for the 14-bit core...;o}
.

Busted!  
<br>