You should be able to do that.
But I think you need to initialize the STEPCOUNT variable, or put a CLEAR at the top.
If it powers up with a value higher than 32, the table jump will throw it outside of the interrupt code.
hth,
|
You should be able to do that.
But I think you need to initialize the STEPCOUNT variable, or put a CLEAR at the top.
If it powers up with a value higher than 32, the table jump will throw it outside of the interrupt code.
hth,
DT
Members who have read this thread : 7You do not have permission to view the list of names.
Posting Permissions
Bookmarks