Instant Interrupts - Revisited

[younesmaia]

Hi,

I´m not being able to access Darrell´s website to download DT_INTS-14 (I already use INTS-18, which is great, but I´m working on a project which runs on a 16F628A this time). Can someone please attach the latest version of both INTS-14 and INTS-18 to this thread, so people can download even if the site is down?

Thanks!

[ScaleRobotics]

Here is the latest version 1.00 of DT_INTS-14. The link is to is site, which is back up. http://www.darreltaylor.com/DT_INTS-14/NEW_DT_INTS.zip

More info on above:http://darreltaylor.com/DT_INTS-14/intro2.html
Older version of above:http://darreltaylor.com/DT_INTS-14/intro.html

and here is the latest version of DT_INTS-18 http://www.picbasic.co.uk/forum/showthread.php?p=82871
More info on DTS_INTS-18: http://darreltaylor.com/DT_INTS-18/home.html

Besides the webpages above, this post contains info about the time re-enter takes, which I did not see details of on Darrel's site.
http://www.picbasic.co.uk/forum/show...7587#post17587

[younesmaia]

Here is the latest version 1.00 of DT_INTS-14. The link is to is site, which is back up. http://www.darreltaylor.com/DT_INTS-14/NEW_DT_INTS.zip

More info on above:http://darreltaylor.com/DT_INTS-14/intro2.html

and here is the latest version of DT_INTS-18 http://www.picbasic.co.uk/forum/showthread.php?p=82871

Still down for me here in Brazil... Even tried do flush my DNS cache to make sure... Would you be kind enough to attach INTS-14 to your post, so I can continue working?

Thanks!

[younesmaia]

Thanks. Now only the only file I still need is elapsed_int-14. Could you please upload that one as well?

Thanks again!

[ScaleRobotics]

Now only the only file I still need is elapsed_int-14. Could you please upload that one as well?

I think the latest version of that is still this one: http://www.picbasic.co.uk/forum/show...7473#post17473

[Michael Wakileh]

Am I the only one confused by the "ALL_INT -- Global Interrupts" interrupt source?

[Darrel Taylor]

ALL_INT references the GIE bit (Global Interrupt Enable).
You can use it like this ...

@  INT_ENABLE  ALL_INT
@  INT_DISABLE ALL_INT

Someone here wanted it, but frankly I think it's easier to just alias the bit, then do GIE = 1.

You can not assign a Handler to ALL_INT as an Interrupt Source.
<br>