Instant Interrupts - Revisited

[circuitpro]

Never used an interrupt before in my life, but am going to try in my current project. I need to use the 'interrupt-on-change' capability of the 18F to detect (and hopefully count) the decoded clock output from a rotary encoder. Do you have (or) can you point me to, an example of 'interrupt-on-change' using your routines?

Thanks very much, and I'm waiting to see the unfinished pages on your site, Darrel!

[Darrel Taylor]

... I need to use the 'interrupt-on-change' capability of the 18F to detect (and hopefully count) the decoded clock output from a rotary encoder.

Try this one from SteveB ...

http://www.picbasic.co.uk/forum/show...5396#post25396

There were some changes to it, so read the rest of the thread too.

hth,

[circuitpro]

I'm on it, and thanks!

[Darrel Taylor]

WOW!

Kudos to Microchip Direct!!!
Ordered them on the 5th, shipped from Thailand on the 6th, received on the 8th.
I can't get anything from California shipped that fast.

5 - 16F1937
5 - 16F1936
1 - 16F1934

$34 with shipping (Fed-Ex).

Everything else is on hold.
Time to update DT_INTS-14.
<br>

[Ioannis]

I can double that. My experience with Microchip Direct was wonderful.

Either 1 pcs or 250, service is top.

Ioannis

[circuitpro]

Darrel,

Want to thank you again for your Instant Interrupts. I inserted them into my huge 18F program, and the elapsed timer is working perfectly! Am going to watch your website and waiting for the "Command Reference"!!

[bcd]

I find it is actually easier and quicker to deal with Microchipdirect than the local microchip office - seems to be a lot cheaper as well ! I wonder if the office just orders online and then drop ships ???

Glad to hear you got some new toys ! Looking forward to the news.

bill.

[Darrel Taylor]

These chips are Amazing ....
They've got everything you could need in a 16F.
I think I even found a kitchen sink

And they are backwards compatible enough that it shouldn't even take very long for the update to DT_INTS.

At $2.52 ea. for the 40-pin jobs, I may never use another 16F.<hr>

And for the "Command reference" ... It's been waiting a few years now.
Everyone just kinda picked it up and went with it. So I got lazy.
Should've, could've, would've, maybe ...
<br>

[Ioannis]

WOW!

5 - 16F1937
5 - 16F1936
1 - 16F1934
Time to update DT_INTS-14.
<br>

Hi Darrel. Did you had any luck with these new chips?

Ioannis

[Darrel Taylor]

I have.
But they haven't been tested very thoroughly..

The update also includes every interrupt source I could find for 14-bit cores. (including F1's).

This page shows the added sources.
If you use the menu on the left, it will take you back to the old version. So don't.
http://www.darreltaylor.com/DT_INTS-14/intro2.html

Download the file at the bottom of the page. Not the one from the Download page.
DT_INTS-14 version 1.0

Woohoo! It's 1.0 finally.
But consider it still beta.

[Ioannis]

I like smiling faces!

Amazing! Thanks.

I have to test them on the new PICs. Wonder whenthey are coming...

Ioannis

[younesmaia]

Hi,

I´m not being able to access Darrell´s website to download DT_INTS-14 (I already use INTS-18, which is great, but I´m working on a project which runs on a 16F628A this time). Can someone please attach the latest version of both INTS-14 and INTS-18 to this thread, so people can download even if the site is down?

Thanks!