Instant Interrupts - Revisited

Closed Thread
Results 1 to 40 of 773

Hybrid View

  1. - 22nd August 2009, 09:30 #1
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Unhappy

    Quote Originally Posted by Darrel Taylor View Post

    If I remove the -k# option it compiles fine.

    .
    Hi darrel ...

    YES ... but BUILD fails ... no HEX generated, halas.

    Bouhouuuuu ...

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  2. - 22nd August 2009, 11:26 #2
    Ioannis's Avatar
    Ioannis
    Ioannis is offline SuperMod
    Join Date
    Nov 2003
    Location
    Greece
    Posts
    4,133

    Did you find this post helpful? Yes | No

    Default

    I am still at 2.50c and although I have an itch to upgrade to 2.60 I do no think I'll do it now.

    Darrel, If one uses MCS to edit and complile (with MPASM assembler) is there a problem?

    Ioannis
    www.signalcom.gr
  3. - 22nd August 2009, 12:26 #3
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Am I following this correctly?
    The problem is not with the new PBP it is with the new MPLAB?
    Does it work with the MPLAB that we used with PBP 2.5?
    Dave
    Always wear safety glasses while programming.
  4. - 22nd August 2009, 12:45 #4
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Wink

    Hi, Dave and Ioannis

    YES ...

    I really think it's URGENT to wait a little !!!

    BUT it seems the problem only Occurs with DT 18 Instant Interrupts ...

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  5. - 22nd August 2009, 12:52 #5
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    So other includes with ASM work properly?
    That would be strange...
    Dave
    Always wear safety glasses while programming.
  6. - 22nd August 2009, 13:06 #6
    Ioannis's Avatar
    Ioannis
    Ioannis is offline SuperMod
    Join Date
    Nov 2003
    Location
    Greece
    Posts
    4,133

    Did you find this post helpful? Yes | No

    Default

    Thanks Alain.

    But with MCS does it compile OK?

    Ioannis
    www.signalcom.gr
  7. - 24th August 2009, 20:21 #7
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Smile

    Quote Originally Posted by Ioannis View Post
    Thanks Alain.

    But with MCS does it compile OK?

    Ioannis
    Hi, Ioannis

    I've verified in real life ... my old programs Work fine, compiled With MCS.

    Was not so evident due to little changes in the resulting HEX ...

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  8. - 22nd August 2009, 17:31 #8
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Acetronics View Post
    BUT it seems the problem only Occurs with DT 18 Instant Interrupts ...
    NOT TRUE!

    As explained in the previous posts, the problem will happen with ANY program that uses PBP statements inside of macro's, when using MPLAB<hr>

    Ioannis,
    PBP 2.60 is really nice. And it works really well with Microcode Studio.

    MPLAB is the problem. But trying to make PBP work with the new MPLAB, meLabs made a mistake, and now it causes new problems.

    Don't wait, go ahead and get the upgrade, but forget about MPLAB.
    <br>
    DT
  9. - 22nd August 2009, 21:03 #9
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Wink

    Quote Originally Posted by Darrel Taylor View Post
    NOT TRUE!

    As explained in the previous posts, the problem will happen with ANY program that uses PBP statements inside of macro's, when using MPLAB<hr>

    <br>
    Hi, Darrel

    You should have understood :

    It works with "DT_INTS-14.bas" ... but not with "DT_INTS-18.bas"

    Its a pity to have also lost the PBP label NAMES ...

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  10. - 24th August 2009, 19:04 #10
    Terry's Avatar
    Terry
    Terry is offline Junior Member
    Join Date
    Dec 2005
    Posts
    24

    Did you find this post helpful? Yes | No

    Default

    Darrel,
    Quick question, off topic from the most recent posts. I am using a PIC16F876A part with the DT_INTS-14.bas and using a timer0 interrupt, everything works wonderful, many many thanks! but when my program size goes past the 2k size I get the message when compiling "Message[306] ... Crossing page boundary -- ensure page bits are set." while I know this is only a warning, my program seems to work fine, but I would like to double check, whether this is a concern or not.
    Thanks,
    Terry
« Previous Thread | Next Thread »

Similar Threads

  1. Clock using Instant Interrupts
    By PICpocket in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 16th February 2009, 21:43
  2. DT instant interrupts with mister_e keypad
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 26th November 2008, 20:02
  3. DT's Instant Interrupts trouble
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 24th November 2008, 20:48
  4. Keypad and DT's Instant Interrupts
    By Homerclese in forum General
    Replies: 11
    Last Post: - 27th April 2007, 06:32
  5. Problems with instant interrupts from DT for pic18
    By dip1 in forum General
    Replies: 1
    Last Post: - 1st November 2006, 03:11

Members who have read this thread : 6

You do not have permission to view the list of names.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules