Instant Interrupts - Revisited

Closed Thread
Results 1 to 40 of 773

Hybrid View

  1. - 20th August 2009, 14:39 #1
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Red face

    Hi, Darrel

    I just have turned to MPLAB 8.36 and PBP 2.60 ...

    Headache : I get this error screen while re-building an existing project :


    Executing: "C:\PBP\PBPMPLAB.BAT" -ampasmwin -k# -p18F452 "Tracteur.bas"
    Executing: "C:\PBP\PBPW.EXE" -ampasmwin -k# -p18F452 "Tracteur.bas"
    Message[301] C:\PBP\18F452.INC 23 : MESSAGE: ( PENSEZ à INDIQUER la BONNE CONFIGURATION ... )
    Message[301] C:\PBP\18F452.INC 24 : MESSAGE: ( PENSEZ à INDIQUER la BONNE CONFIGURATION ... )
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1083 : Address label duplicated or different in second pass (Z00063)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1146 : Address label duplicated or different in second pass (Z00064)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1199 : Address label duplicated or different in second pass (Z00065)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1230 : Address label duplicated or different in second pass (Z00066)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1083 : Address label duplicated or different in second pass (Z00063)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1146 : Address label duplicated or different in second pass (Z00064)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1199 : Address label duplicated or different in second pass (Z00065)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1230 : Address label duplicated or different in second pass (Z00066)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1083 : Address label duplicated or different in second pass (Z00063)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1146 : Address label duplicated or different in second pass (Z00064)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1199 : Address label duplicated or different in second pass (Z00065)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1230 : Address label duplicated or different in second pass (Z00066)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1083 : Address label duplicated or different in second pass (Z00063)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1146 : Address label duplicated or different in second pass (Z00064)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1199 : Address label duplicated or different in second pass (Z00065)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1230 : Address label duplicated or different in second pass (Z00066)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1083 : Address label duplicated or different in second pass (Z00063)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1146 : Address label duplicated or different in second pass (Z00064)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1199 : Address label duplicated or different in second pass (Z00065)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1230 : Address label duplicated or different in second pass (Z00066)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1083 : Address label duplicated or different in second pass (Z00063)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1146 : Address label duplicated or different in second pass (Z00064)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1199 : Address label duplicated or different in second pass (Z00065)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1230 : Address label duplicated or different in second pass (Z00066)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1083 : Address label duplicated or different in second pass (Z00063)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1146 : Address label duplicated or different in second pass (Z00064)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1199 : Address label duplicated or different in second pass (Z00065)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1230 : Address label duplicated or different in second paPICBASIC PRO(TM) Compiler 2.60, (c) 1998, 2009 microEngineering Labs, Inc.
    All Rights Reserved.

    ERROR: Unable to execute mpasmwin.ss (Z00066)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1083 : Address label duplicated or different in second pass (Z00063)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1146 : Address label duplicated or different in second pass (Z00064)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1199 : Address label duplicated or different in second pass (Z00065)
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1230 : Address label duplicated or different in second pass (Z00066)
    Halting build on first failure as requested.
    BUILD FAILED: Thu Aug 20 14:24:12 2009
    All the error lines are referring to DT Instant interrupts ...

    Could you give me a pointer ???

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  2. - 20th August 2009, 19:53 #2
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Unhappy

    the faulty 1083 Line :

    [quote]
    ENDASM?


    1082 ; C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\DT_INTS-18.BAS 00313 Z00063 asm
    1083 Z00063

    ASM?

    ; -- Added for ver. 3.2 --
    ifdef SPPIF ;----{ Streaming Parallel Port Read/Write }--[PIR1, SPPIF]---
    INT_Source PIR1,SPPIF, PIE1,SPPIE, IPR1,SPPIP
    endif
    ifdef BCL1IF ;----{ Bus 1 Collision }--------------------[PIR2, BCL1IF]---
    INT_Source BUS1_INT, PIE2,BCL1IE, IPR2,BCL1IP
    endif


    ...

    ; ifdef ;----{ }-------------[, ]---
    ; INT_Source , ,, ,
    ; endif


    ENDASM?


    1145 ; C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\DT_INTS-18.BAS 00369 Z00064 asm ; -- USB sources --
    1146 Z00064

    ASM?
    ; -- USB sources --
    ifdef USBIF ;----{ USB Interrupt funnel }---------------[PIR2, USBIF]---
    INT_Source PIR2,USBIF, PIE2,USBIE, IPR2,USBIP

    ;----{ Bus Activity Detect }-----------------[UIR, ACTVIF]---
    INT_Source USB_ACTV_INT, UIE,ACTVIE, _NoPriority


    ....


    INT_Source USB_PID_INT, UEIE,PIDEE, _NoPriority
    endif


    ENDASM?


    1198 ; C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\DT_INTS-18.BAS 00415 Z00065 asm ; -- Ethernet sources --
    1199 Z00065

    ASM?
    ; -- Ethernet sources --
    ifdef ETHIF ;----{ Ethernet Module }----------------------[PIR2, ETHIF]---
    INT_Source ETH_INT, PIE2,ETHIE, IPR2,ETHIP

    ;----{ DMA Interrupt }-------------------------[EIR, DMAIF]---
    INT_Source ETH_DMA_INT, EIE,DMAIE, _NoPriority


    ......

    INT_Source ETH_TXER_INT, EIE,TXERIE, _NoPriority

    ;----{ Transmit }-------------------------------[EIR, TXIF]---
    INT_Source ETH_TX_INT, EIE,TXIE, _NoPriority
    endif


    ENDASM?


    1229 ; C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\DT_INTS-18.BAS 00439 Z00066 asm ; -- CAN Module --
    1230 Z00066

    ASM?
    ; -- CAN Module --
    ifdef WAKIF
    ;----{ CAN bus Error }------------------------[PIR3, ERRIF]---
    INT_Source CAN_ERR_INT, PIE3,ERRIE, IPR3,ERRIP

    ;----{ Invalid Received Message }-------------[PIR3, IRXIF]---
    INT_Source CAN_IRX_INT, PIE3,IRXIE, IPR3,IRXIP


    Hope it Helps ...

    PS: Program compiled fine with PBP 2.50c and MPLAB 8.15 ... of course ...
    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  3. - 20th August 2009, 21:24 #3
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Have you made changes? Or is the TRACTEUR program the same as ...

    http://www.picbasic.co.uk/forum/show...23&postcount=4

    It compiles fine here with PBP 2.60 / MPASM 5.20.

    If it's different, can you send me the new version?
    DT
  4. - 20th August 2009, 22:07 #4
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default

    Hi, Darrel

    Same errors ... looks same program !!!

    MPASM is V5.33 here ...

    All other programs NOT USING DT Interrupts compile fine ... sooo, I do not understand what's going on ...

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  5. - 20th August 2009, 23:02 #5
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Because of all the problems people have been reporting, I didn't want to upgrade MPLAB.
    But now I have the latest and greatest.

    The first time compiling the TRACTEUR program, and it compiles just fine.

    I do get that DOS window popping up instead of the progress bar, like others described.

    I'm compiling with MicroCode Studio.
    Are you using MPLABs IDE?

    Added: I'm also using the original Elapsed_INT-18.bas, I don't have your modified version. But I think we talked about that before somewhere and it wasn't a problem.
    Last edited by Darrel Taylor; - 20th August 2009 at 23:08. Reason: Elapsed_INT-18_ExtOsc.bas
    DT
  6. - 20th August 2009, 23:29 #6
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Darrel Taylor
    Are you using MPLABs IDE?
    Duh! Another stupid question on my part ...
    Error[116] C:\PROGRAM FILES\MICROCHIP\MPLAB IDE\PROJETS\TRACTEUR.ASM 1083 : Address ...
    I don't use MPLAB, so can't offer much help there.
    Does anything that Bruce was telling wbubel about MPLAB above help?

    At least it's not related to DT_INTS.
    <br>
    DT
  7. - 20th August 2009, 23:50 #7
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Or another thought, regarding limited length of file names. (Charles Leo)

    http://www.picbasic.co.uk/forum/show...02&postcount=7
    <br>
    DT
« Previous Thread | Next Thread »

Similar Threads

  1. Clock using Instant Interrupts
    By PICpocket in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 16th February 2009, 22:43
  2. DT instant interrupts with mister_e keypad
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 26th November 2008, 21:02
  3. DT's Instant Interrupts trouble
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 24th November 2008, 21:48
  4. Keypad and DT's Instant Interrupts
    By Homerclese in forum General
    Replies: 11
    Last Post: - 27th April 2007, 07:32
  5. Problems with instant interrupts from DT for pic18
    By dip1 in forum General
    Replies: 1
    Last Post: - 1st November 2006, 04:11

Members who have read this thread : 4

You do not have permission to view the list of names.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules