Instant Interrupts - Revisited

[wbubel]

Ok, I'm about to give up. Ive tried everything on Darrel's program that was suggested. I'm still getting the same Build errors as before. I'm using a 18F1220 Pic and MCS to compile with MPLAB to build. I tried to compile using MPLAB but it wont work. All other programs I've compiled and Built I had no problems. HELP

[Bruce]

What errors do you get when trying to compile from within MPLAB?

[wbubel]

What errors do you get when trying to compile from within MPLAB?

I've already posted them (See above Posts 410, 414, and 415 in this thread)

[Bruce]

You have PBP setup in MPLAB as the language tool as shown here: http://melabs.com/support/mplab.htm and you still get the same errors?

[wbubel]

You have PBP setup in MPLAB as the language tool as shown here: http://melabs.com/support/mplab.htm and you still get the same errors?

I tried it with PBP setup in MPLAB and I got a bunch of compile errors

[Bruce]

Those are the errors I was asking about. If you can just setup PBP to work from within MPLAB you really will save yourself a TON of time & headaches.

Show me the errors you get (when PBP is setup to compile in MPLAB), and I'll do my best
to help you get that working.

[Bruce]

I just compiled your code in MCS, then opened the .asm generated in MPLAB, selected
the 18F1220, and clicked the Quickbuild option, and it worked fine. Odd way of doing it,
but it did work.

Can you explain how you're setting up your project in MPLAB? Which version MPASM/MPLAB
you're using, etc?

Also, since it's not finding the .MAC file, I would check my path statement to make sure it
can find all files it needs.