Instant Interrupts - Revisited

Closed Thread
Results 1 to 40 of 773

Hybrid View

  1. - 3rd August 2009, 15:17 #1
    wbubel's Avatar
    wbubel
    wbubel is offline Junior Member
    Join Date
    Jul 2009
    Posts
    23

    Did you find this post helpful? Yes | No

    Default

    Code:
    Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 657 : Found label after column 1. (ASM?)
Error[116]   C:\PIC PROGRAMS\BLINK I.ASM 657 : Address label duplicated or different in second pass (ASM?)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1629 : Found label after column 1. (ENDASM?)
Error[116]   C:\PIC PROGRAMS\BLINK I.ASM 1629 : Address label duplicated or different in second pass (ENDASM?)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1634 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1634 : Illegal opcode (_Main)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1638 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1638 : Illegal opcode (L00005)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1639 : Found label after column 1. (CMPGT?BCL)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1639 : Illegal opcode (_DutyCycle)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1642 : Found label after column 1. (GOSUB?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1642 : Illegal opcode (_SetDutyCycle)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1645 : Found label after column 1. (PAUSE?C)
Error[108]   C:\PIC PROGRAMS\BLINK I.ASM 1645 : Illegal character (0)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1648 : Found label after column 1. (NEXT?BCL)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1648 : Illegal opcode (_DutyCycle)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1649 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1649 : Illegal opcode (L00006)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1653 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1653 : Illegal opcode (L00007)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1654 : Found label after column 1. (CMPLT?BCL)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1654 : Illegal opcode (_DutyCycle)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1657 : Found label after column 1. (GOSUB?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1657 : Illegal opcode (_SetDutyCycle)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1660 : Found label after column 1. (PAUSE?C)
Error[108]   C:\PIC PROGRAMS\BLINK I.ASM 1660 : Illegal character (0)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1663 : Found label after column 1. (NEXTM?BCL)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1663 : Illegal opcode (_DutyCycle)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1664 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1664 : Illegal opcode (L00008)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1667 : Found label after column 1. (GOTO?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1667 : Illegal opcode (_Main)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1671 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1671 : Illegal opcode (_SetDutyCycle)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1674 : Found label after column 1. (MULMID?CBW)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1674 : Illegal opcode (_TotalCount)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1677 : Found label after column 1. (SUB?CWW)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1677 : Illegal opcode (_TotalCount)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1680 : Found label after column 1. (CMPNE?BCL)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1680 : Illegal opcode (_DutyCycle)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1686 : Found label after column 1. (LOW?T)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1686 : Illegal opcode (PORTB)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1689 : Found label after column 1. (GOTO?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1689 : Illegal opcode (L00010)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1690 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1690 : Illegal opcode (L00009)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1696 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1696 : Illegal opcode (L00010)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1699 : Found label after column 1. (RETURN?)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1702 : Found label after column 1. (DDISABLE?)
Error[116]   C:\PIC PROGRAMS\BLINK I.ASM 1702 : Address label duplicated or different in second pass (DDISABLE?)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1706 : Found label after column 1. (ASM?)
Error[116]   C:\PIC PROGRAMS\BLINK I.ASM 1706 : Address label duplicated or different in second pass (ASM?)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1709 : Found label after column 1. (ENDASM?)
Error[116]   C:\PIC PROGRAMS\BLINK I.ASM 1709 : Address label duplicated or different in second pass (ENDASM?)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1714 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1714 : Illegal opcode (_ToggleLED1)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1717 : Found label after column 1. (CMPF?TL)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1717 : Illegal opcode (PORTB)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1720 : Found label after column 1. (LOW?T)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1720 : Illegal opcode (PORTB)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1732 : Found label after column 1. (GOTO?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1732 : Illegal opcode (L00012)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1733 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1733 : Illegal opcode (L00011)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1736 : Found label after column 1. (HIGH?T)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1736 : Illegal opcode (PORTB)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1748 : Found label after column 1. (LABEL?L)
Error[122]   C:\PIC PROGRAMS\BLINK I.ASM 1748 : Illegal opcode (L00012)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1752 : Found label after column 1. (ASM?)
Error[116]   C:\PIC PROGRAMS\BLINK I.ASM 1752 : Address label duplicated or different in second pass (ASM?)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1755 : Found label after column 1. (ENDASM?)
Error[116]   C:\PIC PROGRAMS\BLINK I.ASM 1755 : Address label duplicated or different in second pass (ENDASM?)
Warning[207] C:\PIC PROGRAMS\BLINK I.ASM 1759 : Found label after column 1. (DENABLE?)
Error[116]   C:\PIC PROGRAMS\BLINK I.ASM 1759 : Address label duplicated or different in second pass (DENABLE?)
Halting build on first failure as requested.
BUILD FAILED: Mon Aug 03 09:13:22 2009
  2. - 3rd August 2009, 15:29 #2
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default

    When I compile it works but trying to build using MPLAB I get a masive amount of errors
    Are you compiling from MCS, then importing the .asm file into MPLAB, and trying to
    build it?
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
  3. - 3rd August 2009, 16:10 #3
    wbubel's Avatar
    wbubel
    wbubel is offline Junior Member
    Join Date
    Jul 2009
    Posts
    23

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Bruce View Post
    Are you compiling from MCS, then importing the .asm file into MPLAB, and trying to
    build it?
    Yes, that is the way I have always built .asm files. I never encounted errors to this magnatude before.
  4. - 3rd August 2009, 16:43 #4
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default

    If you're using MPLAB with PBP just setup PBP as a language tool in MPLAB. There's no
    reason to compile in MCS, then import the .asm produced and assemble it again.

    Your PBP code has already been assembled, and the .HEX file has already been created.

    If you have an old version of PBP that's not compatible with the version of MPLAB you have,
    then upgrade PBP or download & install an older version of MPLAB.

    Why are you compiling in MCS then trying to assemble it all again in MPLAB?
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
  5. - 3rd August 2009, 16:56 #5
    wbubel's Avatar
    wbubel
    wbubel is offline Junior Member
    Join Date
    Jul 2009
    Posts
    23

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Bruce View Post
    If you're using MPLAB with PBP just setup PBP as a language tool in MPLAB. There's no
    reason to compile in MCS, then import the .asm produced and assemble it again.

    Your PBP code has already been assembled, and the .HEX file has already been created.

    If you have an old version of PBP that's not compatible with the version of MPLAB you have,
    then upgrade PBP or download & install an older version of MPLAB.

    Why are you compiling in MCS then trying to assemble it all again in MPLAB?
    Just how do I do that in MPLAB? I tried looking and found nothing to make PBP the language tool?
  6. - 3rd August 2009, 17:01 #6
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default

    See this page: http://melabs.com/support/mplab.htm
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
  7. - 5th August 2009, 21:52 #7
    wbubel's Avatar
    wbubel
    wbubel is offline Junior Member
    Join Date
    Jul 2009
    Posts
    23

    Did you find this post helpful? Yes | No

    Unhappy

    Ok, I'm about to give up. Ive tried everything on Darrel's program that was suggested. I'm still getting the same Build errors as before. I'm using a 18F1220 Pic and MCS to compile with MPLAB to build. I tried to compile using MPLAB but it wont work. All other programs I've compiled and Built I had no problems. HELP
« Previous Thread | Next Thread »

Similar Threads

  1. Clock using Instant Interrupts
    By PICpocket in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 16th February 2009, 22:43
  2. DT instant interrupts with mister_e keypad
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 26th November 2008, 21:02
  3. DT's Instant Interrupts trouble
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 24th November 2008, 21:48
  4. Keypad and DT's Instant Interrupts
    By Homerclese in forum General
    Replies: 11
    Last Post: - 27th April 2007, 07:32
  5. Problems with instant interrupts from DT for pic18
    By dip1 in forum General
    Replies: 1
    Last Post: - 1st November 2006, 04:11

Members who have read this thread : 4

You do not have permission to view the list of names.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules