Instant Interrupts - Revisited

[mister_e]

you can use
@ INT_ENABLE RX_INT

and

@ INT_DISABLE RX_INT

[leisryan]

ahhh thanks guys

fixed it toggling both
' CREN = 0
' SPEN = 0

I didn't bother with the interrupts just disabled the Port input thanks I appreciate it!!!

[Norbac]

Hi Darrell, I tried to use your great rutines without any luck. I'm using a 18F248 sending CAN messages and I want to use a timer interrupt to send it.
Just to test the rutines I tried to compile the example you post for timer interrupt and DT_INTS-18.bas rutines. But I got some errors on the compilation. Attached you will find a screen shot of what i'm talking about. If anybody can tell me what I'm doing wrong, it will be a great help for me.

Thanks in advance for all yor help

Alfredo

[Darrel Taylor]

Hi Alfredo,

Well apparently, not all CAN modules are the same.
There are 2 types, CAN and ECAN.

I didn't consider the plain CAN module when I wrote it.

I'll have to make a way for it to detect which module is available and only use the interrupts for it. Then I'll post an update.

But for now, you can just comment out the interrupt Sources that aren't available.
In the DT_INTS-18.bas file, comment out the following lines in the CAN Module section ...

asm  ; -- CAN Module --
  ifdef WAKIF  
               ;----{ CAN bus Error }------------------------[PIR3, ERRIF]---
      INT_Source  CAN_ERR_INT, PIE3,ERRIE, IPR3,ERRIP
  
               ;----{ Invalid Received Message }-------------[PIR3, IRXIF]---
      INT_Source  CAN_IRX_INT, PIE3,IRXIE, IPR3,IRXIP
  
               ;----{ Receive Buffer 0 }------Mode 0--------[PIR3, RXB0IF]---
      INT_Source  CAN_RXB0_INT, PIE3,RXB0IE, IPR3,RXB0IP
               ;----{ FIFO Watermark }--------Mode 1, 2---[PIR3, FIFOWMIF]---
;      INT_Source  CAN_FIFOWM_INT, PIE3,FIFOWMIE, IPR3,FIFOWMIP
  
               ;----{ Receive Buffer 1 }------Mode 0--------[PIR3, RXB1IF]---
      INT_Source  CAN_RXB1_INT, PIE3,RXB1IE, IPR3,RXB1IP
               ;----{ Any Receive Buffer }----Mode 1, 2-----[PIR3, RXBnIF]---
;      INT_Source  CAN_RXBn_INT, PIE3,RXBnIE, IPR3,RXBnIP
  
               ;----{ Transmit Buffer 0 }-------------------[PIR3, TXB0IF]---
      INT_Source  CAN_TXB0_INT, PIE3,TXB0IE, IPR3,TXB0IP
  
               ;----{ Transmit Buffer 1 }-------------------[PIR3, TXB1IF]---
      INT_Source  CAN_TXB1_INT, PIE3,TXB1IE, IPR3,TXB1IP
  
               ;----{ Transmit Buffer 2 }-----Mode 0=-------[PIR3, TXB2IF]---
      INT_Source  CAN_TXB2_INT, PIE3,TXB2IE, IPR3,TXB2IP
               ;----{ Any Transmit Buffer }---Mode 1, 2-----[PIR3, TXBnIF]---
;      INT_Source  CAN_TXBn_INT, PIE3,TXBnIE, IPR3,TXBnIP
  
               ;----{ CAN bus Activity Wake-up }-------------[PIR3, WAKIF]---
      INT_Source  CAN_WAKE_INT, PIE3,WAKIE, IPR3,WAKIP
  endif
  
  list
    endm
  list  
ENDASM

Thanks for the info!

[Norbac]

WOOOOW!
Thank you very much for the info, now I can use your rutines!!! Your info fix my problem

Thanks again!!!

Alfredo

[mister_e]

.Damn.. way to slow this time

my solution was..

asm
RXBnIF=RXB1IF
TXBnIF=TXB2IF
FIFOWMIF=RXB0IF
INT_LIST    MACRO
    INT_Handler TMR1_INT, _ToggleLED1, PBP, yes
    endm
    INT_CREATE
   endasm

From p18f8680.inc file...

;----- PIR3 Bits -----------------------------------------------------
RXB0IF           EQU  H'0000'
RXB1IF           EQU  H'0001'
TXB0IF           EQU  H'0002'
TXB1IF           EQU  H'0003'
TXB2IF           EQU  H'0004'
ERRIF            EQU  H'0005'
WAKIF            EQU  H'0006'
IRXIF            EQU  H'0007'

FIFOWMIF         EQU  H'0000'
RXBnIF           EQU  H'0001'
TXBnIF           EQU  H'0004'

On another hand... seems odd...

[Darrel Taylor]

Good one Steve. That would have worked too.

Since they're actually the same bit's, but with different Names depending on the mode, that might be an easy way for me to fix it. Maybe.
<br>

[mister_e]

But yeah... we know how Microchip work... hard to tell if it will always work... on all PIC

Worth a try!

[Squibcakes]

Steve,

Do you know if the there is any difference in accuracy between using a xtal osc and the internal RC osc esp. in relation to timer interrupts?

Squib