Instant Interrupts - Revisited

[mackrackit]

Read the error message. It tells you what to do.

[R.G.Keen]

Got it. Thanks very much. Somehow I missed that the error message was the cure.

I understand the issue now. It seems to work Now got to go burn chips...

[Ioannis]

Darrel has changed the way DT-INTs work now.

It may surprise but is far better now.

Happy burning

Ioannis

[R.G.Keen]

Darrel has changed the way DT-INTs work now.

It may surprise but is far better now.

Just so I don't miss anything, can you direct me to more information on how they have changed? Is that on line?

[Ioannis]

For the practical side, users just get a descriptive message as of what to do in the main program. This errors,that are instructions really, may scare a little. But they just tell you what to do.

Regarding the setup there is no change for the users.

Ioannis

[R.G.Keen]

Thanks for taking the time to point this out for me.

Like many things, it seems obvious now that you say it, and I get to slap myself on the forehead again.

It's working fine.

[ralfmayr]

Hi Darrel,
i found a problem which is not clear to me:
I hava a 18(L)F25K22 and want to use SSP1_INT for my I2C handler, but after compiling the source, i get this error:

....test.asm 1052 : Symbol not priveiously defined (SSP1IF)

When defining SSP2_INT there is no error.

Regards,
Ralf