Instant Interrupts - Revisited

[wbubel]

OK, so you have MCS set up to use MPASM. You are not using MPLAB.

Can you post your current config settings? Copy the Inc file. And can you post all of the errors you ar getting?

I may have missed something before.

I am using MPLAB for Building

Here is a copy of the config file

;****************************************************************
;*  18F1220.INC                                                 *
;*                                                              *
;*  By        : Leonard Zerman, Jeff Schmoyer                   *
;*  Notice    : Copyright (c) 2004 microEngineering Labs, Inc.  *
;*              All Rights Reserved                             *
;*  Date      : 01/27/04                                        *
;*  Version   : 2.45                                            *
;*  Notes     :                                                 *
;****************************************************************
        NOLIST
    ifdef PM_USED
        LIST
        "Error: PM does not support this device.  Use MPASM."
        NOLIST
    else
        LIST
        LIST p = 18F1220, r = dec, w = -311, f = inhx32
        INCLUDE "P18F1220.INC"  ; MPASM  Header
        __CONFIG    _CONFIG1H, _IESO_OFF_1H & _FSCM_OFF_1H & _INTIO2_OSC_1H
        __CONFIG    _CONFIG2H, _WDT_ON_2H & _WDTPS_128_2H
        __CONFIG    _CONFIG3H, _MCLRE_ON_3H
        __CONFIG    _CONFIG4L, _LVP_OFF_4L
        NOLIST
    endif
        LIST
EEPROM_START	EQU	0F00000h
BLOCK_SIZE	EQU	8