Instant Interrupts - Revisited

Results 1 to 40 of 773

Threaded View

  1. - 27th July 2006, 03:00 #11
    Demon's Avatar
    Demon
    Demon is offline SuperMod
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,172

    Did you find this post helpful? Yes | No

    Default

    One note of interest, I kept hanging at the end of one of the interrupt modules, like it lost an address on the stack or something. I ran ICD and I saw the execution just hang on the ENDIF at the very bottom.

    I have an RX interrupt that would write out to an I2C device 2 bytes received via USART. I removed the I2C command from within the interrupt and instead set a flag. Then I checked the flag from within the main logic and issued the I2C write and everything worked perfectly.

    Darrel, here are some screenshots in case you see something obvious. Sorry, I didn't keep a copy of the code.

    Robert
    Attached Images Attached Images  
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!
« Previous Thread | Next Thread »

Similar Threads

  1. Clock using Instant Interrupts
    By PICpocket in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 16th February 2009, 21:43
  2. DT instant interrupts with mister_e keypad
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 26th November 2008, 20:02
  3. DT's Instant Interrupts trouble
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 24th November 2008, 20:48
  4. Keypad and DT's Instant Interrupts
    By Homerclese in forum General
    Replies: 11
    Last Post: - 27th April 2007, 06:32
  5. Problems with instant interrupts from DT for pic18
    By dip1 in forum General
    Replies: 1
    Last Post: - 1st November 2006, 03:11

Members who have read this thread : 5

You do not have permission to view the list of names.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules