Matrix Keypad routine

[mister_e]

well...

    DEFINE KEYPAD_ROW        8       ' 8 row 
    define KEYPAD_ROW_PORT   PORTc   '   on PORTB
    DEFINE KEYPAD_ROW_BIT    0       '      <7:0>
    DEFINE KEYPAD_COL        4       ' 4 col 
    DEFINE KEYPAD_COL_PORT   PORTc   '   on PORTA
    DEFINE KEYPAD_COL_BIT    0       '      <3:0>

looking at your schematic bellow

There's some problems there for sure... You don't use a 8X4 keypad

    DEFINE KEYPAD_ROW		4      
    DEFINE KEYPAD_ROW_PORT   	PORTC   
    DEFINE KEYPAD_ROW_BIT	0
    
    DEFINE KEYPAD_COL        	3
    DEFINE KEYPAD_COL_PORT   PORTC
    DEFINE KEYPAD_COL_BIT    	4

[chrisshortys]

Thanks yet again mister_e! You should move in with me, that way i wouldnt have to use the net to bother yo every other day

and yes i put the dec2 myvar on the lcdout command so all works now

time to play with it some more!