pic16c54a

[mavi]

ustam eger hotmail adresin varsa bana ver daha cabuk ulasıirim sana cekiniyorsan ozel mesaj at tesekkurler..... elektroline

[mavi]

lady is centirmen help my i 3 moon search pic16c54 prokrammer bat not found is site no help somebody

electoline! arkadasim verdigin adrese baktım sorusturdum benim istedigim entegreyi programlayamıyor tekrar yardimin icin tesekkurler

[Melanie]

http://www.elnec.com/index.php

Their programmers support 16C54... check this list...

example 1. manufacturers list...

http://www.elnec.com/manuf_list.php?...nk=jetprog.php

example 2. microchip list...

http://www.elnec.com/dev_list.php?pg...rochip_dev.htm

You get what you pay for...

If you are in Turkey...

Infogate - Era Bilgi Sistemleri Yayincilik Elektronik San. ve Tic.ltd
Mr. Gokhan Dincer
Soyak Baglarbasi Evleri, B-3 blok D:3
Baglarbasi, Uskudar, Istanbul 34664
Tel: +(90) (216) 5300571 - 5300572 - 5300 573, Fax: +(90) (216) 5300 574
E-mail: Infogate - Era Bilgi Sistemleri Yayincilik Elektronik San. ve Tic.ltd
Web page: www.infogate.org

[mavi]

for help tanks MELANİE bat is mashine 800euro and no support adapter
im search easy programmer+ shema again tanks

[Melanie]

You never specified a budget... just said you needed a programmer for a particular device. I don't know what kind of adaptor you seek, but elnec pretty much manufacture every possible adaptor for almost any programming device in existance.

The problem with going 'cheap' is you end up wasting so much time that you might as well have bought something better to start with.

[mavi]

hi MELANİE plz see here


http://rapidshare.de/files/15052806/pic16c54.rar.html

[Melanie]

The third design (for 18-pin PIC) will match your requirements exactly and be the simplest to construct. You will also be able to use it for similar 18-pin PIC devices like 16F84 and 16F628.