serin2 read until?

[eoasap]

Thanks Dwayne, i'll work on that first thing saturday morning. do you think there will be any dataloss doing a loop for the read?

so pseudo code something like this?

loop:
SERIN2 one byte
check that byte for Carriage return (when to stop)
if CR, exit_loop
goto loop

exit_loop:

[Dwayne]

Hello eoasap,

e>>so pseudo code something like this?

loop:
SERIN2 one byte
check that byte for Carriage return (when to stop)
if CR, exit_loop
....
process data
.....
goto loop

exit_loop;
<<

yes this is a good pseudo code example.

Now to answer your other question:

do you think there will be any dataloss doing a loop for the read?

This depends on how your data is being sent. If it is a non-stop 40 characters, yes, you will lose some data. You will have to change your read to a different method... like reading in a string of characters or something before processing.

If your data is coming in spurts, you can use a "control" character to "flag the receiver that the following character is the one you want read.

If I were you, I would *FIRST* find out HOW the data is being sent to you. Then program your PIC for this format of sending. *IF* you can chose the way the data is being sent to you, then you have many many available options!...

Dwayne

[Dave]

eoasap, to answer your original question, use the "WAITSTR" modifier to finish loading your array of characters or variables. This is covered in your manual under "SERIN2".

Dave Purola,
N8NTA

[eoasap]

I through about that, but doesn't WAITSTR wait for that string before reading in bytes? i want to read in bytes until a certain byte is received (carriage return),

The length of the string being received is unknown, but terminated with the carriage return

[Dave]

eoasap, I'm Sorry, What I meant was to use the optional ending character to finish the array load. I usually use the carriage return character $0D to end my input strings. Sorry for the confusion.....

Dave Purola,
N8NTA

[eoasap]

Thanks Dave, I'll give that a try