Communication PIC to PIC?

**BobK** · - 3rd February 2006, 03:50

Hi Rhatidbwoy,

SERIN2 is fully explained on page 132 of the PBP manual. Serpin is the alias I have assigned to PortA.4 which is where the data will be received. 36081 is the mode of communications I am using derived from the Appendix A on page 201. 300 stands for 300ms which is the timeout for a signal to be received. If no data is received within the 300ms then GOTO Main. Wait ("A") tells the system to wait until the character "A" comes in. This is known as a qualifier. The dec3 tells SERIN2 to convert the decimal value in ASCII and store the value in variable B7.

I truely am not an expert like some of the other people on this forum and I am sure that they can give a more thorough explaination, but what I learned here comes from the manual and trying different things.

BobK

Rhatidbwoy · - 4th February 2006, 23:09

ok that is great help. The method that I am coming across to use is the HSER--- command.. The USART on hte device. I think that will clarify more to what I need to do, but still the problem with transmitting. I found info about that and it helps more than were I stand.

Rhatidbwoy · - 5th February 2006, 21:16

Another Quick one. I am trying to get HSERIN and HSEROUT to work. have you done anything with them. I have attached portion of my prog. does this even look right as far as direction wise.