reading, writing, and displaying from eeprom

[Rhatidbwoy]

ok that make sense. Pointing at it really help. going blind at such a young age. Me that is. Ok, I will have to try that and see what happens.

Then the other thing that I will have to do is make more notes to what is doing what. Thanks!

[Rhatidbwoy]

I have made the corrections as far as the TRA in label ENTER and still gt no good response. Thinking that there was a problem with how I am going at the read write i used the sample program with some modification and got it to work.

The READ/WRITE sample program was for SEROUT so I changed it to LCDOUT and I got for the information to work. I was also available to see that the information that I was working with was stored in the eeprom. That is a good thing.

With my program knowing that I have to set everything I tried a few lines and see if anything would change. Nothing. A few lines as far as a channel in one menu then a channel in another menu. Nothing. I am still plucking the minds to figure what can be done.

[Rhatidbwoy]

ok. got the problem figure out. I would have like the information to go from line to linet. I was writing it as line = linet. Not the way to go. I needed for it to be linet = line.